Main Article Content

Abstract

Abstract: Although allowable amounts of glycol contamination in diesel engine oil, no research has been conducted on how these levels and varying loads affect engine performance The research used a four-stroke diesel engine to investigate the effect of different glycol contamination levels (0, 120, and 220 ppm) under two engine loads (4.5 and 9 kW). Brake specific fuel consumption, brake thermal efficiency, friction power, and exhaust gas temperature were measured to determine the engine performance. The experiment used the factorial arrangement in a completely randomized design (CRD) with three replicates. Increasing the contamination levels from 0 to 120 and then to 220 ppm under constant engine load significantly increased brake specific fuel consumption, friction power, and exhaust gas temperature and decreased brake thermal efficiency. Increasing the engine load from 4.5 to 9 kW with constant oil glycol contamination levels significantly increased brake thermal efficiency, friction power, and exhaust gas temperature and decreased brake specific fuel consumption. The results of the statistical analysis showed significant differences in the interaction between glycol contamination levels and load levels. Lower friction power (5.6 kW) and exhaust gas temperature (165.33 °C) were produced by combining the first contamination level (0 ppm) with the first load (4.5 kW), while the lowest brake specific fuel consumption (0.24 kg/kWh) and highest brake thermal efficiency (32.14%) were produced by combining the first contamination level (0 ppm) with the second load (9 kW). The study concluded that diesel engine performance decreases when engine oil is exposed to the permissible levels of contamination above with changes in engine load. This study can aid diesel engine maintenance and operational instructions, particularly in glycol-contaminated diesel engine oil.

Keywords

Engine performance Exhaust gas temperature Friction power Glycol contamination lubricating oil

Article Details

How to Cite
Hasan, H. A., Al-Sumaidaee, S. A. K. M. ., & Abdul-Munaim, A. M. . (2025). Diesel Engine Efficiency under Varying Loads and Engine Oil Contaminated with Safe levels of Glycol. Basrah Journal of Agricultural Sciences, 38(1), 20–29. https://doi.org/10.37077/25200860.2024.38.1.2

References

  1. Abdul - Munaim, A. M., Reuter, M., Abdulmunem, O. M., Balzer, J. C., Koch, M., & Watson, D. G. (2016). Using terahertz time-domain spectroscopy to discriminate among water contamination levels in diesel engine oil. Transactions Of The ASABE, 59(3), 795-801.
  2. Abdul-Munaim, A. M., Ornik, J., Koch, M., & Watson, D. G. (2019). Terahertz time domain spectroscopy to detect different oxidation levels of diesel engine oil. Lubricants, 7(2), 18. doi:10.3390/lubricants7020018
  3. Abdulmunem, O. M., Abdul-Munaim, A. M., Aller, M. M., Preu, S., & Watson, D. G. (2020). THz-TDS for Detecting Glycol Contamination in Engine Oil. Applied Sciences, 10(11), 3738. doi:https://doi.org/10.3390/app10113738
  4. Abed, A. F., Hasan, H. A., & Abdul-Munaim, A. M. (2024). Refinement of Internal-Combustion
  5. Engine Oil Properties Via Magnetic Flux. IOP Conference Series: Earth and Environmental Science,1371 092003, (pp. 1-7). doi:10.1088/1755-1315/1371/9/092003
  6. Al-Hasan, M. (2003). Effect of ethanol–unleaded gasoline blends on engine performance and exhaust emission. Energy Conversion and Management, 44(9), 1547–1561. doi:https://doi.org/10.1016/S0196-8904(02)00166-8
  7. ASTM. (2013). ASTM D2982-07 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils. West Conshohocken, PA: ASTM. doi:10.1520/D2982-07R13
  8. Booser, E. R. (1994). CRC Handbook of Lubrication and Tribology, Volume III (Vols. Monitoring, Materials, Synthetic Lubricants, and Applications, Volume III). CRC Press. doi:10.1201/9781420050455
  9. Deuss, T., Ehnis, H., Freier, R., & Künzel, R. (2010, May). Friction power measurements of a fired diesel engine piston group potentials. MTZ Worldw, 71, 20–24. doi:https://doi.org/10.1007/BF03227011
  10. Eastop, T. D., & McConkey, A. (1993). Applied thermodynamics for engingeering technologists (5th ed ed.). Essex: Pearson Education Limited.
  11. Enweremadu , C. C., & Rutto , H. L. (2010). Combustion, emission and engine performance characteristics of used cooking oil biodiesel—A review. Renewable and Sustainable Energy Reviews, 14(9), 2863-2873. doi:https://doi.org/10.1016/j.rser.2010.07.036
  12. Ferguson, C. R., & Kirkpatrick , A. T. (2015). Internal Combustion Engines: Applied thermosciences (3rd ed.). Wiley.
  13. Guan, W., Zhao, H., Ban, Z., & Line, T. (2019). Exploring alternative combustion controlstrategies for low-load exhaust gas temperature management of a heavy-duty diesel engine. International Journal of Engine Research, 20(4), 381-392. doi:10.1177/1468087418755586
  14. Kadhim, N. S., Hasan, H. A., & Abdul-Munaim, A. M. (2023). A study of the Effect of Diesel Oil Contamination with Glycol on the Performance of a Diesel Engine. IOP Conference Series: Earth and Environmental Science. 1262. Kufa: Institute of Physics. doi:10.1088/1755-1315/1262/9/092012
  15. Kasbergera, J., Fromherz, T., Saeed, A., & Jakoby, B. (2011). Miniaturized integrated evanescent field IR-absorption sensor: Design and Experimental verification with deteriorated lubrication oil. Vibrational Spectroscopy, 56, 129-135.
  16. Kumar, P. (2009). Significance of the ratio of exhaust temperature to coolant temperature and its effect on various engine working parameters. World Congress on Engineering, 2. London.
  17. Liddell, G. J., & Marshall, R. (1952). A Test for Antifreeze Contamination in Crankcase Oil. SAE Technical Paper (No. 520054), 1-8. doi:https://doi.org/10.4271/520054
  18. Mahon, L. L. (2004). Diesel generator handbook. MA: Elsevier Butterworth-Heinemann.
  19. Mallikappa , D. N., Reddy, R. P., & Murthy, C. S. (2012). Performance and emission characteristics of double cylinder CI engine operated with cardanol bio fuel blends. Renewable Energy, 38(1), 150-154. doi:10.1016/j.renene.2011.07.012
  20. Musthafa, M. M. (2016). Synthetic lubrication oil influences on performance and emission characteristic of coated diesel engine fuelled by biodiesel blends. Applied Thermal Engineering, 96(5), 607-612. doi:10.1016/j.applthermaleng.2015.12.011
  21. Saravanan, S., Kumar , C. R., Pugazhendhi, A., & Brindhadevi, K. (2020). Role of thermal barrier coating and porous medium combustor for a diesel engine: An experimental study. Fuel, 280, 118597. doi:10.1016/j.fuel.2020.118597
  22. Singh, D., Gu, F., Fieldhouse, J. D., Singh, N., & Singal, S. K. (2014). Prediction and Analysis of Engine Friction Power of a Diesel Engine Influenced by Engine Speed, Load, and Lubricant Viscosity. Advances in Tribology, 14(1), 928015. doi:https://doi.org/10.1155/2014/928015
  23. Singh, S. P., Asthana, S., & Kumar, N. (2016). Development of an Intake Runner of a CI Engine for Performance Enhancement and Emission Reductions Due to Variations in Air Flow Pattern within the Runner. SAE Technical Paper 2016-01-1015, 13. doi:https://doi.org/10.4271/2016-01-1015
  24. Syamsiro, M., aptoadi, H., Kismurtono, M., Mufrodi, Z., & Yoshikawa, K. (2019).