Article Sidebar

Download
Statistic
Read Counter : 0

Downloads

Download data is not yet available.

Main Article Content

Abstract

This study aims to predict the traction requirements represented by draft force and slippage percentage under different soil moisture levels (7, 14, 22, and 28%), using three plows namely: - moldboard plow, chisel plow and disk plow, Three tillage depths (15, 20, 25 cm) and three forward speeds (1.83, 3.06, 5.22 km/h) were tested in clay loam soil in Qurna, Basra. Data were analyzed using Design Expert software to model draft force, slippage, and tractor performance. Based on the results obtained, it is found that the draft force increased by 62.84% and 29.05% when the depth was increased from 15 to 25 cm and the speed from 1.83 to 5.22 km h-1 respectively. Meanwhile, the slippage increased by 78.27 and 54.79% when the depth was increased from 15 to 25 cm and speed from 1.83 to 5.22 km h-1 respectively. Moreover, soil moisture at 14% gave the lowest draft force and slippage, reaching 10334 N and 12.39%, respectively, compared to other moisture levels. The results show that the use of the disk plow recorded the lowest draft force and slippage of 9966 N and 15.90%, while the use of the moldboard plow led to an increase in the draft force and slippage as it reached 12671 N and 19.02% respectively. The data analysis shows that the developed model has a good ability for prediction compared to the field data, as the coefficients of determination of the draft force and slippage are 0.9531 and 0.9480 respectively.

Keywords

Draft force Forward speed Plowing depth Prediction Slippage Soil moisture content

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite
Almoosa, M. F. ., Almaliki, S. A. ., & Al-Atab, S. M. S. . (2025). Prediction of Traction Requirements and Slippcage Percentage for Three Plow Types under Various Operational Conditions. Basrah Journal of Agricultural Sciences, 38(1), 288–311. Retrieved from https://bjas.bajas.edu.iq/index.php/bjas/article/view/2544
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Al Aridhee, J. K. A., Abood, A. M., Kassar, F. H., Łysiak, G., & Dakhil, M. M. (2020). Influence of tractor slip on some physical properties of the soil and fuel consumption at varying tillage depths and speed. Plant Archives, 20(1): 141-145.‏ https://www.plantarchives.org/back-issue.html
  2. Almaliki, S. (2017). Development and Evaluation of Models for MF-285 Tractor Performance Parameters Using Computational Intelligence Techniques. Ph.D. Dissertation. University of Tehran, Iran, pp: 215.
  3. Almaliki, S. (2018). Simulation of draft force for three types of plow using response surface method under various field conditions. Iraqi Journal of Agricultural Sciences, 49 (6). https://doi.org/10.36103/ijas.v49i6.151
  4. Almaliki, S. A., Himoud, M. S., & Muhsin, S. J. (2021). Mathematical model for evaluating slippage of tractor under various field conditions. Basrah Journal of Agricultural Sciences, 34(1): 49-59.‏ https://doi.org/10.37077/25200860.2021.34.1.05
  5. Al-Suhaibani, S. A., Wahby, M. F., Aboukarima, A. M., & Tabash, I. S. (2015). Study on the effect of soil moisture content and plowing speed on draft requirements of a moldboard plow. Journal of Advances in Agriculture, 4(3): 477-486.‏ https://rajpub.com/index.php/jaa/article/view/4280
  6. Amponsah, S. K., Bobobee, E. Y., Agyare, W. A., Okyere, J. B., Aveyire, J., King, S. R., & Sarkodie-Addo, J. (2014). Mechanical cassava harvesting as influenced by seedbed preparation and cassava variety. Applied Engineering in Agriculture, 30(3): 391- 403. https://elibrary.asabe.org/abstract.asp?aid=44938
  7. ASABE, Standard. (2009). ASAE D497.6 Agricultural Machinery Management Data. ASAE. St. Joseph. MI:49085,1-8. https://cutt.ly/EfMlj1q
  8. ASAE, (2003). ANSI/ASAE S296.5 DEC. 2003 (R2018) General Terminology for Traction of Agricultural Traction and Transport Devices and Vehicles. MI, USA: ASAE, St. Joseph. https://cutt.ly/ofMzqC9
  9. Azimi-Nejadian, H., Karparvarfard, S. H., Naderi-Boldaji, M., & Rahmanian-Koushkaki, H. (2019). Combined finite element and statistical models for predicting force components on a cylindrical mouldboard plow. Biosystems Engineering, 186, 168-181.‏ https://doi.org/10.1016/j.biosystemseng.2019.07.007
  10. Aziz, S. A. D. A. A., AL-Tahan, Y. H., & fazaa AL-Taee, Y. (2013). Effect of some tillage equipment and depth on some technical parameters for machine unit under different speeds. Kirkuk University Journal for Agricultural Sciences (KUJAS), 4(1).‏ https://www.iasj.net/iasj/article/76611
  11. Black, C. A. (1965). Methods of soil analysis Part 1, Part 1. Madison, Wisconsin, American Society of Agronomy. http://www.worldcat.org/oclc/85962062
  12. Godwin, R. J., O’Dogherty, M. J., Saunders, C., & Balafoutis, A. T. (2007). A force prediction model for mouldboard plows incorporating the effects of soil characteristic properties, plow geometric factors and plowing speed. Biosystems Engineering, 97(1): 117-129. https://doi.org/10.1016/j.biosystemseng.2007.02.001
  13. Kamilaris, A., & Prenafeta-Boldú, F. X. (2018). A review of the use of convolutional neural networks in agriculture. The Journal of Agricultural Science, 156, 312- 322. https://doi.org/10.1017/s0021859618000436
  14. Kim, W. S., Kim, Y. J., Park, S. U., & Kim, Y. S. (2021). Influence of soil moisture content on the traction performance of a 78-kW agricultural tractor during plow tillage. Soil and Tillage Research, 207, 104851.‏ https://doi.org/10.1016/j.still.2020.104851
  15. Mamkagh, A. M. (2019). Effect of soil moisture, tillage speed, depth, ballast weight and, used implement on wheel slippage of the tractor: A review. Asian Journal of Advances in Agricultural Research, 9(1): 1-7.‏ https://doi.org/10.9734/AJAAR/2019/46706
  16. Mckyes, E. (1985). Soil cutting and tillage. 1st ed. Elsevier Science Publishers. https://shop.elsevier.com/books/soil-cutting-and-tillage/mckyes/978-0-444-42548-5
  17. Monjezi, N. (2021). Energy prediction of wheat production using data mining technique in Iran. Basrah Journal of Agricultural Sciences, 34, 14- 27. https://doi.org/10.37077/25200860.2021.34.1.02
  18. Monjezi, N., & Hosseinzadeh, E. (2021). An assessment of Energy Consumption for Canola Production System in Iran (A Case Study: Amirkabir Agro-Industry). Basrah Journal of Agricultural Sciences, 34(1): 28-37. https://doi.org/10.37077/25200860.2021.34.1.03
  19. Muhsin, S.J. (2017). Performance Study of Moldboard Plow with Two Types of Disc Harrows and Their Effect on Some Soil Properties Under Different Operating Conditions. Basrah Journal of Agricultural Sciences, 30(2): 1-15. https://doi.org/10.37077/25200860.2017.37
  20. Nassir, A. J. (2018). Effect of moldboard plow types on soil physical properties under different soil moisture content and tractor speed. Basrah Journal of Agricultural Sciences, 31(1): 48-58.‏ https://doi.org/10.37077/25200860.2018.75
  21. Nassir, A. J., Ramadhan, M. N., Alwan, A. A., and Muhsin, S. J. (2024) Optimisation and Modelling of Soil Pulverisation Index Using Response Surface Methodology for Disk Harrow Under Different Operational Conditions. Acta Technologica Agriculturae, 27(2): 76-83.‏ https://doi.org/10.2478/ata-2024-0011
  22. Ranjbarian, S., Askari, M., & Jannatkhah, J. (2017). Performance of tractor and tillage implements in clay soil. Journal of the Saudi Society of Agricultural Sciences, 16(2): 154-162.‏ https://doi.org/10.1016/j.jssas.2015.05.003
  23. Salim, A. E. A., Almaliki, S. A., & Nedawi, D. R. (2022). Smart Computing Techniques for Predicting Soil Compaction Criteria under Realistic Field Conditions. Basrah Journal of Agricultural Sciences, 35(1): 188-211.‏ https://doi.org/10.37077/25200860.2022.35.1.15
  24. Tayel, M. Y., Shaaban, S. M., & Mansour, H. A. (2015). Effect of plowing conditions on the tractor wheel slippage and fuel consumption in sandy soil. International Journal of ChemTech Research, 8(12): 151-159.‏ https://www.sphinxsai.com/chemtech.php
  25. Wandkar, S. V., Jadhav, P. P., Gholap, B. S., Gonjari, V. V., & Pawar, S. G. (2013). Influence of forward speed and tillage depth on draft of primary tillage implements in sandy loam soil.‏ International Agricultural Engineering Journal, 22(3): 26–30. https://www.cabidigitallibrary.org/doi/full/10.5555/20143045817
  26. Zhao, J., Zhou, J., Sun, C., Wang, X., Liang, Z., & Qi, Z. (2022). Identification model of soil physical state using the Takagi–Sugeno fuzzy neural network. Agriculture, 12(9): 1367. https://doi.org/10.3390/agriculture12091367
  27. Zoz, F.M. & R.D. Grisso (2003). Traction and Tractor Performance, ASAE Distinguished Lecture Series, Tractor Design No.27 USA. https://www.semanticscholar.org/paper/Traction-and-Tractor-Performance-Zoz-Grisso/d637f6581adef1101176d2db2b034bf3b06e6026